15.Table Lifter 3D || Drive Mechanism,Transfer/Moving

Simulation: https://youtu.be/N8WIbhfg31U

Purpose

• • To lift workpieces and feed them to the next process.
• Operation
  • The workpieces are fed from the previous process by a robot arm.
    The lifter lifts up and stop at an appropriate height level of the next feeding machine.

Points for use

• Class 100 Transfer of glass substrates in a clean room that is controlled in accordance with Class 100 requirements.

Target workpiece

• Shape: Glass substrate
• Size: t0.5xW350xD360mm

Design Specifications

Operating Conditions or Design Requirements

• Lifter stroke: 118mm
• External dimensions: W655xD350xH289mm

Required Performance

• Load: Workpiece+base=35N

Selection Criteria for Main Components

• Select a servo motor that can lift the load 35N at a speed of 5mm/s.

• 
  
• Note :

• Rod End Bearings

  

  Product name	Rod End Bearings - Standard
  Part number	PHSC8

  * Orange colored cells in the table below indicate the part numbers used in this example.

• Small Ball Bearings

  

  Product name	Small Ball Bearings Double Shielded
  Part number	B608ZZ

  * Orange colored cells in the table below indicate the part numbers used in this example.

Flanged Linear Bushings

Product name	Flanged Linear Bushings - Double Type
Part number	LHFRWM16G
Features	Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.

• Link to download :http://swiftation.com/AB1X